Valentine one which mode

Go to your car start it up so your detector is on. Now use the volume switch to turn it off, then turn it on using the switch while pushing it in it should then have all the lights on the unit come on, then let go. I think it will then show the software version scrolling, just hit the control nob quickly in and it should display 1 then follow my instructions so to get to the first step on my list you should hit the button 7 times until it shows 7 on the display and the arrow will glow up so hold down the button until it changes to down I think it takes about seconds of holding it in to change the direction.

Now if you miss one of the steps by passing the number finish the rest and shut the unit down then go back to the other step, if you continue to hit the button until you get back to the number or letter you missed without shutting it down you run a risk of it not saving for some reason.

Private First Class. If you really want to. Police and the military strive for "situation awareness". Situation awareness is also the philosophy behind V1. The front and rear antennas, the Radar Locator and the Bogey Counter all work together to keep you informed of What is around you, How Many, and Where. All visual warnings are automatically corrected for outside brightness, so you never have to fiddle with a dimmer. Moreover, V1 already has three computer modes ready to adapt the Warning System to your particular needs.

A lot of thought went into these various features to make them work as a system. I personally think V1 works appropriately for almost any situation I can imagine.

Still, you can reprogram it to change its responses. Worse yet, you might inadvertently disable a protection you really need. So think carefully before changing the factory settings. How to enter the Programming Mode. Release the Control Knob. How to determine your software version. Press and immediately release the Control Knob to display software version.

The software-version number is four digits that display one digit at a time in the Bogey Counter-example: 2. Note your software number, then see the table below for features that are programmable in your unit. Press and immediately release the Control Knob to exit software-version display. How to program your desired features. To select the next Feature Character in the sequence, press and immediately release the Control Knob. The Feature State is indicated by direction arrows on the Radar Locator.

Question… Would you buy Uniden 7 or V1 gen 2…. My Mercedes is hard wired for V1…. So I can put new gen 2 in sports car. If I went to the Uniden…. Does Can please do a video showing on jbv1 works and what setting you use for custom sweeps plus settings you use? You can see my settings and my recommended settings at the bottom of the article. Is If this is needed what would you do? I have been using yours from many moons ago is this still good?

Please reread my explanation in this article regarding custom frequencies. Snap forgot one thing sorry. How can I bring my v1 profile for sweeps to gen2? Does anything need to be turned off in settings of gen 2 to make this work? There are different options for the Gen2 compared to the Gen1. Your best bet is to go through and create a new profile for your V1 G2. They are different detectors with different options and they work differently. I have the R7 in one of my vehicles and want to get another for my other vehicle but maybe I should give the V1 Gen2 a try?

Price is no concern as a ticket is always WAY more. While testing, please make sure you only run one detector powered on at a time or else they will interfere. G2 is a fantastic unit, can it be configured to be as Ka quiet as G1 was? Are you concerned about false alerts or long distance alerts? Sounds like long distance, extra sensitivity is my concern then. I just recall extra sensitivity option on the V1G1 and manually disabling it and performance of the radar still being fantastic while it was more quiet.

OK, thank you… I am planning to download as soon as the detector arrives. There is a similar function to eSavvy then i guess? I have the V1 — Gen 1. Can the new V1 be programmed in the unit? Can I use it as a plug and go? I dont want to connect to a phone or use apps.

Honest story …I sold my Audi q5 and bought the Acura RDX the R7 was hardwired no issues I moved it to the Acura and bam engine light went on I had a brand new Acura with 11 miles on it and no matter what i did i coud not get the check engine light off I brought it back to the dealer who after one hour and 3 techs and 2 laptops reset my car and replaced my bettery.

I still am not sure of the new Gen 2 V1 can be used as a plug n play detector — no apps or phone — Thanks. Advanced features, like GPS lockouts, require a companion app. I want to use a spare phone I have sitting around.

So you can run JBV1 with your V1 without a phone to get the false alert filtering and display features. Hi Vortex, for some reason my V1 gen 2 does not want to pair with my v1 connection app… I have a oneplus 7 pro not sure if its a compatibility issue but it hooks up to JBV1 just fine. Any ideas on what this might be? Make sure you fully disconnect from JBV1 before trying to use V1connection.

Then I read about the JBV1 app on your site and tried it there and was able to connect. Hi Vortex. Thanks for the guide and all of your hard work for the community. For the V1G2 dark mode, is there a way to have the setting persist after a power cycle without going into V1Connect each time? But I purchased a new Valentine G2 a couple of months ago to use on my bike only.

I have it paired to my phone Droid via bluetooth to transmit within my helmet. I have used the JVB1 app as well at the V1 app. I liked the JVB1 app better because it would auto-connect whenever I started my bike. When I first got it, it worked fine. But no radar alert chirps are coming through. I must have, at some point changed the settings. I have tried everything I can think of to get just the alerts back. Our free app enables more subtle alterations.

The logic of reprogramming is as follows—when you enter the Programming Mode you arrive at a sequence of switches that you step through.

Mostly these are on-off switches; you have the option of toggling the switch or skipping over it. How to enter the Programming Mode. How to determine your software version. The software-version number is five digits that display one digit at a time in the Bogey Counter—example: 4.