What skis should i buy

The most common setup is a ski with a large camber presence in the mid and rocker applied at the tip. This is a very common setup for a range of abilities. Skis with rocker applied at both the tip and tail are becoming more popular, and mostly on wider skis that are primarily rid on powder. Here's where we dial down on what you love to do on the mountain. What do you enjoy the most? Go everywhere with control and precision.

That what all mountain skis are all about. For the few that love deep powder, you need to get yourself a pair of Powder skis.

Typically much wider than your average all mountain ski, often powder skis are loaded up with rocker for maximum flotation. But often people these days love a powder ski for all mountain - due to its playful soft flex. Its your decision. Skis in this category tend to be on the stiffer and heavier side, often with more rocker in the tip and less in the tail. They are built for ripping up the mixed conditions that steep mountain sides and tight, tricky lines have to offer. For those that love a good groomed trail in the morning, and getting the slickest, smoothest carve available.

These tend to have a narrow waist, meaning they are great for initiating turns and are often used by beginners to get them going. For those that love the feeling of flying, you can buy specific skis that are built for tricks and airtime. Usually heavily cambered and twin tipped - these are built with strong edges and dense based to cope with the hardcore park nuts demands. Also known as backcountry skis, alpine touring AT skis are designed for going uphill as well as downhill. These skis are typically light for their width and many feature fittings that accept climbing skins.

Often brands offer woman focused models that tend to be lighter and made of softer materials in order to make turning easier with less weight and pressure. But either gender can ride on either ski. We now recommend you browse our range of skis, and see if there is anything that catches your eye. All our skis have been hand picked by us, and we are confident that we will have something for you. But if you are still stuck in spaceland, then not to fear - we have another option.

Skis without Bindings are called flat skis. Flat skis are typically all mountain, all mountain wide, freestyle or powder skis. Wider bindings improve the torsional strength of the ski. Bindings now have a wider mounting platform that decreases the amount of leverage it takes to tip the ski on edge.

A ski's waist width directly correlates to the condition that you will mostly be skiing in. Skis with skinnier waists are quicker edge to edge, better for on trail carving and easier to maneuver for a new or beginner skier.

The wider the ski is underfoot, the more float you get in the powder and the more stability you get in the crud and broken snow. The more time you spend off-trail, the wider your skis should be. Skis under 85mm are best suited for skiers that will be spending just about all of their time on the groomed trails. This waist width can range from beginner all the way up to expert and everything in-between.

High-powered carving skis for experts usually have a waist width around mm which makes the ski very agile, yet wide enough to go through the crud that pops up on the groomers. Skis for beginners are in this waist width that will make them lighter and easier to control while learning.

Skis mm are primarily used for on-trail skiing but have the ability to spend some time off the groomers in the right snow conditions. They have maneuverability on and off the trail and versatility so you can spend time in the powder.

Skis mm are the ideal all mountain waist width for skiers seeking true versatility. They make medium to long radius turns on the groomers with ease and have the ability to float in all but the absolute deepest of powder and we hope you get those days.

Ultra wide waist widths provide you with the most floatation in the deep powder and the most stability when things get cruddy or bumpy.

They are not the most agile ski for making short quick turns on the groomers but are easily manageable for making your way back to the lifts for another lap. Rocker is the slightly bent up or reverse camber shape that lifts off of the ground when the ski is laying flat on the ground.

Rocker makes the ski more maneuverable by engaging the tip of the ski into a turn quicker and easier. It also helps you float to the top of the ski just like a water ski does. Snow is a three dimensional medium, just like water.

Having your skis on top of the snow makes it much easier for you to keep up speed, suffer less fatigue, turn and enjoy the powder. Rocker also absorbs negative vibrations that can be caused by bumps or crud. Think of a traditionally cambered ski as a loaded spring - when you hit the variations in the snow, the cambered tip will send those vibrations through the ski, back through the binding, past the boots and to your body.

A rockered ski will absorb those vibrations rather than sending them to your body. Rocker is here to stay. Now some form of rocker exists in almost every type of ski, no matter what the intended use is.

Rocker gives you more maneuverability and the extra length improves your stability. Cambered skis have the most traditional shape with the center of the ski raised when the ski is laying flat on the ground un-weighted.

They provide the most edge hold, stability and rebound for on-trail skiing. Rocker initiates a turn quickly while the camber provides stability. Most all mountain skis have this type of rocker profile. Rockered tips initiate turns quicker and float better in soft snow. Camber underfoot provides stability and edge grip. Rocker in the tail releases the ski from turns easier for developing skiers and provides better maneuverability off the trail.

This combination is the most versatile for on and off trail skiing. Full Rocker skis have a U shape to them with the base of the ski flat on the ground while the tips and tails rise up, usually pretty dramatically. Fully rockered skis are most used in the deep powder for the best floatation and have a surfy, playful feel.

An increasing number of all mountain skis are starting to use this shape for versatility. The tail profile can have a large impact as to how that ski reacts; mostly it changes how the ski exits a turn. Twin Tip tail shapes are where the tail of the ski is turned up as much as the shovel is. A twin tip allows you to ski and land backwards. There are many all mountain options that are twins so they are not only reserved for freestyle skis.

Contact us News My Ski Basics. There are three main types of ski rocker profile: camber, rocker, and flat. Many modern shapes use a combination of more than one of these.

The more rocker a ski has, the easier the ski is to turn and the more lift it gives. If you have less rocker, it can be a little trickier to turn in soft snow. Sidecut is a crucial thing to consider when buying your first skis as the shapelier a ski is ie- the deeper the sidecut , the tighter you will be able to turn. Skis with really deep sidecuts will be awesome for slalom but will perform less stably at speed.

A less deep sidecut will allow skis to make long fast arcs and will help skis to float as it keeps them closer to the surface. Flat is more commonly a shape for snowboards than skis, as it helps with easy transitions and better manoeuvrability than camber. Ski Rigidity The rigidity of the skis you choose will be dictated by your ability and your expectations. Track-Mounted Bindings These are bindings which are mounted onto a track on the ski which allows them to be perfectly positioned for the size of your ski boot.

Benefits of mounted bindings include the fact that the track plate allows the ski to naturally flex so more evenly distributes the force you apply when turning.

Drill-Mounted Bindings As the name suggests, drill-mounted bindings are drilled and glued onto the ski making them a permanent fixture.